Model WSO-BP Wireline Set Bridge Plugs are compact, small OD, and designed for easy drill out. These bridge plugs will set securely in all but the very highest tensile casing. A ratchet lock ring stores the setting force in the plug. The one-piece packing element and metal back-up rings combine for a superior seal. The case hardened, one piece slips virtually eliminate premature setting, yet can be easily drilled out. They are available for 2-3/8” through 20” casing.

Electric wireline set • Sets in any grade casing – including P-110 • Rated to 10,000 P.S.I at 350° F • One-piece slips hardened to depth of wicker only • Small O.D.’s for speed and safety when running • Rocker action metal back-ups prevent rubber extrusion • Can be set on any wireline pressure setting tool • Casing plugs top set with shear ring • Sets in proper sequence for positive pack-off and secure set • Drillable cast iron construction • For temporary or permanent service • Designed for extra high pressure and rapid drill-out • Plug stays set until gas pressure equalizes when drilling out


    • Can be set directly with Owen style wireline setting tools
    • Easy for mill out
    • Ratchet lock rings secure dynamic setting force
    • Three piece packing element and rocker action metal back up rings combine for a superior seal
    • Shear studs are Owen style and connect directly to Owen setting tools
    • These bridge plugs can be run directly using Owen Setting Sleeves
    • Crossovers are not required

Casing OD (in)Casing Wt (lbs/ft)Setting Range Min (in)Setting Range Max (in)Tool OD (in)Release Force (lbs)Part number
2 7/86.4-6.52.3402.5252.1607,0002820216322
3 1/25.7-10.32.8673.2582.75013,0002820275322
5 1/213-254.5805.0444.24030,0002820424322
5 3/422.5-254.5805.0444.24030,0002820424322