‘ SLIMCONNECT’ EXTERNAL SLIP CONNECTOR
The ‘Slimconnect’ External Slip Connectors allow the attachment of coiled tubing to the CT Tool Workstring, via the provision of a threaded connection.
The ‘Slimconnect’, as its name suggests, has an O.D. which is smaller than a standard ‘Torconnect’. This enables the ‘Slimconnect’ to be used in operations where a maximum diameter of coiled tubing is required to be run in a minimal I.D. restriction.
The design of the ‘Slimconnect’ utilizes a set of helical ‘wicker’ type slips that grip the tubing in a ‘wedging’ action, thus, an increase in tension results in increased grip.
- High tensile strength for size
- Slimline body O.D.
- Internal Pressure Seal
- Replaceable Slips
|Coiled Tubing Diameter (in)||Max OD (in)||Min ID (in)||Thread||Part Number|
|1 1/4||1.687||0.750||1” AMMT||2191125324|
|1 1/2||2.125||1.000||1.5” AMMT||2191150324|
|1 3/4||2.375||1.000||1.5” AMMT||2191175324|
|2||2.875||1.500||2 3/8” PAC||2191200324|
|2 3/8||3.125||1.500||2 3/8” PAC||2191237324|